5
/
14
SC POWER SCB45PRO
ATTENTION!
1.
USE ONLY THE AC TO DC ADAPTER AND DC CHARGER WHICH ARE INCLUDED WITH THE PACKAGING NEVER TRY TO
ATTEMPT TO USE OTHER CHARGER UNITS, OTHERWISE THE BATTERY MIGHT POTENTIALLY BE DAMAGED.
2.
DO NOT CRANK THE CAR WHEN CHARGE IS ON PROCESSING, WHILE THE OTHER FEATURES, SUCH AS USB OUTPUT HAS STILL
ALLOWED TO USE.
3.
AS LONG AS CHARGE IS FINISHED, PLEASE DISCONNECT THE CHARGER FROM POWER SOURCE AND DETACH THE DC PLUG
FROM DEVICE.
4.
THE DEVICE WILL BE PROTECTED AT EXTREME TEMPERATURE, IT IS NOT RECOMMENDED TO OPERATE AT AMBIENT
TEMPERATURE LOWER THAN -20 OR HIGHER THAN +45 . OTHERWISE THE OPERATION MAY NOT BE ACTIVATED AT
THIS CIRCUMSTANCES,
OR MORE CRANK ATTEMPTS MIGHT NECESSARY IN CASE THE FIRST TRIAL HAS FAILED.
5.
MOREOVER, THE CHARGING PROCEDURE WILL NOT BE STARTED IF THE TEMPERATURE OF BATTERY PACK IS EXCEEDED THE
RANGE FROM
3
℃
TO 40
℃
.
CONDITION BEFORE USE
Ensure the below conditions are in proper situation before press the JUMP START button.
1.
Ensure the capacity of battery is full
Jump Start can only be used when the spectrum
light up to GREEN or YELLOW.
3.
Ensure the contact terminals of the car battery are clean.
Erase any corroded substance from battery terminals and ensure
correct contact point at the clip. Please note the contact surface
of battery terminals must making proper strong and correct
positioning before pressing the JUMP START button.
