11
/
14
SC POWER SCB45PRO
power again for next attempt after the problem has fixed.
5.
In case the operation against the car with dead battery has failed and Red & White lights on front panel flash
alternately, please replace by a good battery as soon as possible or assign a professional engineer to examine the car
detailed.
OPERATION OF CAR MEMORY SAVER
(For model JPR4500M with car memory saver function only )
Step 1
Connect the OBDII plug to the
OBDII port of the car.
(Location of OBDII underneath
the dash board or beside the fuse
box.)
Step 2
Insert the plug of OBDII into booster
output.
Step 3
Press the power button to switch on the
device and make sure that the device is
fully charged.
Hold the Memory Saver button for 5
seconds until the battery indicator flashes
rotatory under convection. It is now
possible to proceed with the battery
replacement. The device will be turned
off automatically after 45 minutes. Please
ensure the battery replacement to be
finished within this time.
ATTENTION:
1.
Ensure the battery of the Jump Start is fully charged before use .
2.
Ensure all car doors have been completed closed.
3.
It is highly recommended to follow the instructions above , otherwise the car memory may go lost during the car
battery replacement.
