12
/
14
SC POWER SCB45PRO
4.
When the car battery replacement is completed , power off the device and disconnect the OBDII plug from the car.
This MUST be done before the car engine is turned on , otherwise the device might be damaged.
5.
While using the device in this mode , keep the electrical load on the vehicle to a minimum and monitor the battery
indicator regularly.
6.
Please ensure the proper connection & the battery indicator flashes rotatory under convection before battery
replacement , otherwise the electronic data will lose.
OPERATION OF ENTIRE LIGHTS
Follow the sequence of button’s operation as below. The light must be turned off after use, otherwise the power of battery
will be depleted.
SIDE LIGHT BUTTON
LIGHT / S.O.S BUTTON
PRESS
STATUS
PRESS
STATUS
DESCRIPTION
1
LEFT SIDE LIGHT ON
1
RED LIGHT ON (S.O.S)
EMERGENCY INDICATION
2
RIGHT SIDE LIGHT ON
2
WHITE LIGHT ON (LIGHT)
AUXILIARY WORK LIGHT
3
BOTH SIDE LIGHT ON
3
RED AND WHITE
ALTERNATIVELY FLASH
EMERGENCY INDICATION
4
SWITCH OFF
4
SWITCH OFF
OPERATION OF POWER OUTLETS (USB)
5V USB OUTLET
Connect the electronic appliance to device’s USB port and turn on the power. It can deliver 5.0VDC 2.1A max. to power up
most 5VDC input digital devices like mobile-phone, tablet PC as well as other 5V USB products.
ATTENTION:
1.
To make sure the connection is successful. Please check the electronic appliance. Detach the electronic appliance from
the device after use and make sure the power to this device is turned off.
2.
The device will be protected if the drawn current has over 5.0VDC
2.1A , pl
ease turn on the power again for next
operation after the problem has fixed.
