38 SBS-6000
Reference
value and
compare
results
（
Test type is
conductivity
）
“REF: 2070S” stands for 2070S, “89%REF” stands for
test conductivity reference value is 89%. When
impedance and voltage value marked as
means test value exceed alarm threshold,
battery status is normal, but if test voltage marked
as
that means battery voltage is lower than
alarms, impedance marked as
means
compare results lower than replaced value of setup
alarm threshold. As tested impedance marked as
and then the compare results are lower
than warning value of alarm threshold as well as
higher than replaced value.
Note:
·
Test cable and battery must have good connection otherwise it will
affect test results.
·
When test value display “Over” that means the impedance exceed
test range.
·
When test value display “------“, that means test cable open or test
cable is cut off. When test cable connected improperly or tested item
value is over exceed the test range it will display “------“.
5.4.1
String Testing
Functions description
When perform the string testing, can test battery voltage, impedance,
and temperature at the same time.
