Saia-Burgess Controls AG
Manual for PCD2.W745 and PCD3.W745
│
Document 26-796 E
NG06 │ 2018-10-12
2
Configuration
2-1
Configuration of the module
2
Configuration
2.1
Configuration of the module
The module has four input channels, which are individually configurable:
Input ranges / sensor types:
Thermocouples (TC)
Type J / K according to IEC584
Resistive Temperature detectors (RTD)
Pt100 / Pt 1000 according to IEC751
Ni100 / Ni1000 according to DIN 43760
Sensor type
Range
Output value
Units
TC
Type K
(NiCr-Ni)
-270…+1372°C
-454…+2501°F
+3…+1645 K
-2700…+13720
-4540…+25010
+30…+16450
1/10°C
1/10°F
1/10 K
Type J
(Fe-CuNi)
-210…+1200°C
-346…+2192°F
+63…+1473 K
-2100…+12000
-3460…+21920
+630…+14730
1/10°C
1/10°F
1/10 K
RTD
Pt100
-200…+850°C
-328…+1562°F
+73…+1123 K
-2000…+8500
-3280…+15620
+730…+11230
1/10°C
1/10°F
1/10 K
Pt1000
-200…+850°C
-328…+1562°F
+73...+1123 K
-2000…+8500
-3280…+15620
+730…+11230
1/10°C
1/10°F
1/10 K
Ni100
-60…+250°C
-76…+482°F
+213…+523 K
-600…+2500
-760…+4820
+2130…+5230
1/10°C
1/10°F
1/10 K
Ni1000
-60…+250°C
-76…+482°F
+213…+523 K
-600…+2500
-760…+4820
+2130…+5230
1/10°C
1/10°F
1/10 K
mV
±75 mV
-75…+75 mV
-30000…+30000
2.5 μV*
Ohm
600 Ω
0…600 Ω
0…60000
10 mΩ
5000 Ω
0…5000 Ω
0…50000
100 mΩ
* mV range: Output value • 2.5 = voltage in μV
Connection & compensation techniques:
Connection / compensation techniques
RTD
Ohm
2 – Wire connection
3 – Wire connection
4 – Wire connection
TC
Internal reference junction (CJC int.)
External reference junction (CJC ext.)**
mV
Voltage measurement using sense inputs
** In this operating mode, input 0 is used to measure the temperature of the
external reference junction.
