Saia-Burgess Controls AG
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
35
It is recommended that you use text fields which exceed the size shown in the editor by up to 20%.
To determine the text field length, you can use the table for min. and max. x sizes below.
General recommendations for the
Y size
in relation to the font size and format
Basic rule: the text should lie WITHIN the contours.
For buttons and editing fields, a 2 pixel shadow is added (on the
inside
for button contours and on
the
outside
for editing fields).
If the text is too big for the editing field, it will overlap the edge and the 3D shadowing.
You should make allowances for the following edges:
Simple text fields and those with several lines: 2 x edge width + 1
Buttons: 2 x edge width + 5
Editing fields: 2 x edge width + 5
Fontgröße
yGröße
min xGröße
max xGröße
Arial
36
41
7
36
Arial
24
28
7
24
Arial
20
23
6
20
Arial
16
19
3
16
Arial
12
15
3
12
Arial
10
12
3
10
Arial Bold
36
41
9
35
Arial Bold
24
28
7
23
Arial Bold
20
23
6
20
Arial Bold
14
16
4
15
CourierNew
20
23
12
12
CourierNew
16
19
10
10
CourierNew
12
14
7
7
CourierNew
10
12
6
6
CourierNew Bold 20
23
12
12
CourierNew Bold 14
17
8
8
Tahoma
24
29
5
24
Tahoma
20
25
4
20
Tahoma
16
20
4
16
Tahoma
12
15
4
12
Tahoma
10
13
3
10
Tahoma Bold
24
29
7
29
Tahoma Bold
20
25
6
24
Tahoma Bold
14
17
4
17
Internal special functions
The internal sensor values are made available to the web application. For this purpose, INT varia-
bles reserved by the system are updated cyclically by the firmware with the current value and made
available to the web application.
7.5.1 Gesture recognition
The panel allows the recognition of user gestures on the touchscreen.
The information is made available in internal variables.
The following gestures can be recognised:
Swiping, final speed when swiping, tapping, pressing, duration of the press
