Saia-Burgess Controls AG
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
48
ReadFile on remote host has
failed!
Regular polling of the PPO failed.
Communication
buffer OVF in Spider_fileReadln()!
When loading the file, more data were received than the buffer can hold.
Range is null!
Area of a bar chart was calculated incorrectly.
TCR
value out of range!
The min./max. limits for a TCR value were exceeded.
value out of default range!
Invalid value for a TCR, e.g. "aa" for time.
TEQ
Reading UTF string failed;
The end of the file was probably reached while reading a
string.
8
Handling: Precautionary measures
Glass touchscreen
Because the touchscreen is pressure-resistant, you can put pressure on the screen with your finger.
Please do not use sharp instruments as these could cause permanent damage to the touchscreen.
The pressure required to activate the display is predefined and cannot be changed.
Never strike the touchscreen hard – the layer of glass which is used to reinforce the two touchscreen
layers could be destroyed as a result.
Information regarding the LCDs in the MB Panel display
The liquid in the LCD display contains an irritant substance. If this liquid should come into contact
with your skin, wash the affected area under running water for at least 15 minutes.
If the liquid in the LCD display should get into your eyes, flush your eyes under running water for at
least 15 minutes and consult a doctor.
Properties of the LCD display
The colours and brightness of the individual MP Panel displays are individual and may vary slightly
from display to display.
Care instructions
These terminals with a display are designed for permanent, maintenance-free operation.
