Saia-Burgess Controls AG
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
13
1.5.1 Mounting location
The device can be mounted horizontally or vertically.
To ensure the most accurate temperature measurement possible, check that the sensor is not
affected by any external influences when choosing a mounting location.
Air circulation must be ensured – the ventilation slits in the panel (on all sides) must not be cov-
ered.
Mount the device using the supplied mounting adapter.
To mount the panel, first insert the panel into the mounting adapter and then lower it until it locks
onto the locking ratchet.
1.5.2 Operating and handling the touchscreen
Only use your fingers to operate the touchscreen. Do not use any pointed or sharp instruments (e.g.
pointed metal objects, paper clips or screwdrivers…)
Touch pens cannot be used to operate the device.
Do not expose the panel to di-
rect sunlight or lighting.
Do not install it close to heat
sources such as heating sys-
tems, refrigerators, lamps etc.
Do not install it close to win-
dows and doors because of
draughts.
Do not position the panel in a
draught produced by air condi-
tioning or ventilation systems.
