Sayson AltiTouch Plus User Manual Download Page 51

Page: 51 / 68

51 AltiTouch Plus User Guide

Deleting an Entry from the
Directory

Find the entry you would like to delete.

Press the

Delete

softkey.

Press the

Delete

softkey again to confirm.

Deleting all Entries in the Directory

Once you have deleted the Directory, you cannot get
entries back. You can protect the Directory by
locking it.
To permanently delete all entries in the directory:

Press the Directory button

to open the

Directory.

Press the

Deletelist

softkey

Press the

Delete

softkey to confirm.

Locking the Directory

You can lock the Directory so that entries cannot be
deleted or changed. You cannot add entries to a
locked directory.

1. Press

2. Press

3. Press . The display shows

Directory

locked

To unlock the Directory:

1. Press

2. Press

3. Press . The display shows

Directory

unlocked.

Summary of Contents for AltiTouch Plus





































































Search results

Summary of Contents for AltiTouch Plus

Reviews:

Related manuals for AltiTouch Plus

Brands by name

Popular brands

Sayson AltiTouch Plus, User Manual

Search results

Summary of Contents for AltiTouch Plus

Reviews:

Related manuals for AltiTouch Plus

Brands by name

Popular brands