Sayson AltiTouch Plus User Manual Download Page 50

Page: 50 / 68

AltiTouch Plus User Guide 50

To change the name, use the

Backspace

softkey or

to erase letters. Use the dial

pad and the

NextSpace

softkey to add

letters. Press the

ChangeCase

softkey to

switch between upper and lower case.

Press

Save

to save changes.

Copying from the Callers List, the
Redial List, or the Display to the
Directory

Open the Callers List, Redial List, or answer
a call.

When the number is displayed on the screen,
press

. If the entry includes a name

and number, the display will show

Saved:Directory

If the entry is a number only (such as in the
Redial List), you will be prompted to enter a
name. Once you’ve pressed the

Save

softkey to save the name, the display will
show

Saved: Directory

Dialing from the Directory

Find the entry you would like to call in the
Directory.

Lift the handset to dial the number, or press
the

Dial

softkey or

to dial the

number using Handsfree. Directory
unlocked.

Summary of Contents for AltiTouch Plus





































































Search results

Summary of Contents for AltiTouch Plus

Reviews:

Related manuals for AltiTouch Plus

Brands by name

Popular brands

Sayson AltiTouch Plus, User Manual

Search results

Summary of Contents for AltiTouch Plus

Reviews:

Related manuals for AltiTouch Plus

Brands by name

Popular brands