17
RT-TGP/RT-BT OWNER’S MANUAL
10
Use a Phillips screwdriver to remove
the two pan head Phillips screws (S)
and washers (T) that are pre-installed
in the side of your switchbox mounting
bracket assembly (G). Position the
switchbox mounting bracket assembly
(G) next to the front, right stand leg (H),
so the mounting holes in the switchbox
mounting bracket align with two
exposed mounting holes on the right
edge of the stand leg. Insert each
pan head Phillips screw (S) through a
washer (T), and thread each into one
of the exposed mounting holes in the
stand leg and switchbox mounting
bracket.
Make sure the switchbox assembly is facing the same way as the “SawStop” logo on the front of
the stand.
i
You should now have four socket head cap screws
(R), four washers (J), and four lock washers (Q)
leftover from your Benchtop Stand hardware bag.
They will be used to attach the benchtop stand to
the router table.
i
G
S
T
H
