manualshive.com logo in svg

Savant PAV-AIM7C, Deployment Manual

Share
Download
Savant PAV-AIM7C Deployment Manual Download Page 5

5   of   35

Savant IP Audio Deployment Guide
009-1571-02  |  190508

Copyright © 2019 Savant Systems, LLC

2. Deployment Steps

Follow these steps to successfully deploy a Savant IP Audio device.  This page can be used as a checklist to record which steps have been completed.

1.  Review product specifications and connection details ...................................................................................................................................................................................

 

See

 Savant IP Audio Equipment Overview

2.  Install the Savant IP Audio devices ..........................................................................................................................................................................................................................

 

See 

Installation

3.  Install Savant qualified AVB/TSN Network Switch (Optional) ......................................................................................................................................................................

 

See 

Adding an AVB/TSN Switch

4.  Add the Savant IP Audio devices into a RacePoint Blueprint® configuration

 ...................................................................................................................................... 

See 

Adding a Savant IP Audio to a Configuration

Summary of Contents for PAV-AIM7C




































Reviews:

No comments

Brands by name

Popular brands

Load more brands