Version 1.0
[
35
]
SAV 244 .01 / .03 / .06 /
.07 / .10 / .11
EN
2. SAFETY
CAUTION!
Damage!
The influence or destructive effect of circular magnets on electronic medical
devices, computers, watches and data carriers must be noted.
■
Keep electronic medical devices, computers, watches and data carriers
away from the exposure zone of the magnetic field.
Workstation
NOTE!
The operator’s workstation is at the machine operating area. Ensure
sufficient stability and fastening.
2.1
Intended use
The intended use of permanent magnetic circular chucks is to hold workpieces in machine tools.
Depending on the model of the permanent magnetic circular chucks, different type of machine tools are suitable
for their use (see section 3 “Technical specifications”).
The permanent magnetic circular chucks are attached to the machine tool using threads and screws on the rear.
The magnetic holding force is switched off by mechanical displacement of the magnetic poles.
The technical specifications and ambient conditions must always be observed (see section 3 “Technical
specifications”).
Operating conditions
■
If possible, avoids air gaps between workpiece and pole plate, e.g. caused by unevenness, rough surfaces,
dirt and burrs.
■
Avoid thin workpieces if possible.
■
Avoid workpieces with a small contact surface.
■
Use workpiece materials with the highest possible ferromagnetic alloy content (e.g. Fe and Co).
The adhesion forces are significantly reduced on stainless steel, cast iron or a high nickel content.
■
The permanent magnetic circular chucks are intended for indoor use only.
Summary of Contents for 244.01
Page 55: ......
