Version 1.0
[
30
]
SAV 244 .01 / .03 / .06 /
.07 / .10 / .11
1. INTRODUCTION
1. INTRODUCTION
These instructions are intended for manufacturers, installers, owners and for the operating and maintenance
personnel of systems in which the permanent magnetic circular chucks are used. The instructions are part of the
scope of delivery of the permanent magnetic circular chucks.
These operating instructions contain information on areas such as the technical specifications, safety, correct and
proper use as well as operation and maintenance with reference to the permanent magnetic circular chucks.
However, they also contain some information about potential risks in combination with the higher level machine.
The objective is to enable the
person/company assembling and operating the overall machine
to identify possible risks from operation of the overall machine
which arise from the use of the
permanent magnetic circular chucks.
NOTE!
Store the operating instructions freely accessible, ready to hand at the
place of use of the permanent magnetic circular chucks. The operating
instructions must be read, understood and applied by each person tasked
with the following work on the permanent magnetic circular chucks:
■
Transport and storage
■
Assembly and commissioning
■
Operation
■
Maintenance and repairs
■
Decommissioning and disposal
NOTE!
These instructions become part of the set of documents which also contains
the documents for the higher level system parts and machines and applies
in combination with these.
1.1
Manufacturer's information
SAV GmbH
Gundelfinger Strasse 8
90451 Nuremberg
Germany
Phone: +49 911 94 83 0
Fax:
+49 911 480 14 26
Email: [email protected]
Web: www.sav.de
Summary of Contents for 244.01
Page 55: ......
