FS-BA-en-2210.docx
25
13
Accessories
When attaching accessories to your sensor, please note that the dead weight
of the accessories must be taken into account!
13.1
Standard accessories for force gauges with internal
measuring cell
•
AC 43 Standard Attachments Metal
•
AE 01 Standard clamp Clamping range from 0 to 7 mm, 0 to 500 N
•
AE 02 Wide jaw clamp Clamping range from 0 to 6 mm, 0 to 500 N
•
AE 03 Strap tension clamp Clamping width from 0 to 2.5 mm, 0 to 500 N
•
AE 04 Strap tension clamp Clamping width from 0 to 6 mm, 0 to 500 N
•
AE 05 Rope and thread tension clamp 0 to 500 N
•
AE 06 Cable pull-off clamp Clamping width 1.5 to 6 mm, 0 to 500 N
•
AE 07 Wedge clamp Clamping width 0 to 6 mm, 0 to 500 N
•
AE 2K screw clamp Clamping width 0 to 15 mm, 0 to 2000 N
•
AE 500 Screw clamp Clamping range from 0 to 10 mm, 0 to 500 N
•
AFK 02 Holder for force gauges
Further accessories can be found in the webshop
13.2 External measuring cells
External sensors are available in the webshop
. For each sensor you
need the service corresponding to the nominal load from the following table, incl.
connector and memory chip:
