26
FS-BA-en-2210.docx
FS 402
Connector for FS incl. PARAMETER MEMORY mounted on measuring cell and
two-point adjusted with weight up to 0.5kN
FS 403
Connector for FS incl. PARAMETER MEMORY mounted on measuring cell and
two-point adjusted with weight up to 2kN
FS 404
Connector for FS incl. PARAMETER MEMORY mounted on measuring cell and
two-point adjusted with weight up to 5kN
FS 405
Connector for FS incl. PARAMETER MEMORY mounted on measuring cell and
two-point adjusted with weight up to 20kN
FS 406
Connector for FS incl. PARAMETER MEMORY mounted on measuring cell and
two-point adjusted with weight up to 50kN
FS 407
Connector for FS incl. PARAMETER MEMORY mounted on measuring cell and
two-point adjusted with weight up to 120kN
FS 408
Connector for FS incl. PARAMETER MEMORY mounted on measuring cell and
two-point adjusted with weight up to 250kN
13.2.1 Adjust and calibrate
In order to adjust and calibrate the entire measuring chain, a measuring
device and sensor are required in the core laboratory! Your QM
representative can provide you with information on the period in which
recalibration is necessary. In any case, we recommend a DAkks calibration certificate
for every new device and sensor.
13.2.2 Additional sensors
If you purchase sensors for your device at a later date, it is necessary to send the
device to the KERN laboratory, as the entire measuring chain is required for adjustment
and calibration.
Check which other sensors in your range currently need recalibration or will need it in
the foreseeable future and send them together to the KERN laboratory to minimise
freight costs and downtime. Observe the national and international transport
regulations for devices with permanently installed lithium-ion batteries.
