7
HDD Replacement
3-2.
Turn to the rear side of the system
1.
and open the rear cover by
unfastening all the screws (x6).
Gently
2.
flip up the rear cover due
to various connectors connecting
the motherboard to the LCD
screen.
Unscrew the screw (x1) of the
3.
HDD holding bracket.
Disconnect the HDD connector
4.
and remove it with the holding
bracket from the motherboard.
HDD replacement for 8.4” system
3-2-1.
The HDD is installed on the motherboard, you need to uncover the rear cover
first to access it. If your system is equipped with a stand or a wall-mount bracket,
please remove them first.
To remove and replace the HDD, please follow the steps below. The procedure is
different depending on the 8.4” and 12.1” system being installed.
Unfasten the screws (x2) to
5.
separate the HDD holding bracket
from the hard drive disk.
Reverse the steps above to
6.
replace the hard drive disk.
