22
CMOS Operation Mode
CMOS Reset
To clear the CMOS,
1. Remove the power cable from the system.
2. Open the system, and set the ‘CMOS Operation jumper’ from ‘CMOS
Normal’
to ‘CMOS Reset’. (refer to the jumper shown below)
3. Connect the power cable to the system, and
power on the system:
in ATX mode: press the power button and it will fail power on
in AT mode: turn on system power
4. Remove the power cable from the system.
5. Return the "CMOS Operation mode" jumper setting from "CMOS
Reset" to
"CMOS normal".
6. Connect the power cable and power on the system.
CMOS Operation Mode
Function
JP5
▲ CMOS Normal
CMOS Reset
2
1
2
1
LCD ID Setting
Several configurations are applied to different sizes of panel.
Please refer to the followings to complete relevant settings.
Resolution
LVDS/TTL
Output Interface
JP6
Bits
Channel
800 x 600
24
Single
1st: LCD Panel
2nd: VGA port
8
5 7
2
1 3
6
4
1024 x 768
24
Single
8
5 7
2
1 3
6
4
800 x 600
18
Single
8
5 7
2
1 3
6
4
*800 x 600
18
Single
8
5 7
2
1 3
6
4
1024 x 768
18
Single
8
5 7
2
1 3
6
4
CRT only
(Pineview CRT
only)
8
5 7
2
1 3
6
4
*remark: specialized for Sharp 12.1” LQ121S1LG41/LQ121S1LG42 panel.
