© Satmap Systems Ltd
© Satmap Systems Ltd
80
20.00 Accessories
20.00 Accessories
The following accessories are available from
Satmap. For a full range, please visit
www.
satmap.com
.
20.01 Mounts
For mounting the Active 10 GPS unit onto a
bike or in a vehicle:
20.01a Bike Mount
The Bike Mount has a robust, flexible fitting
and is designed for using the Active 10 GPS
unit on a bike. It can be attached to the
handle bars, stem or crossbar, allowing you to
get the most out of your cycling and mountain
biking experience.The Standard Battery Back
of the Active 10 is replaced with a Mount
Battery Back which has a moulded section
and clips onto the Bike Mount.
20.01b Vehicle Mount
The Vehicle Mount is a tough unit designed
for using the Active 10 GPS in motor vehicles.
It has a powerful suction cup for attachment
to smooth surfaces such as a windshield. It
can also be fitted to any flat surface, such as
the dashboard, using the adhesive Mounting
Plate. This product will primarily appeal to
drivers of off-road vehicles where navigation
on accurate topographical mapping is a must.
20.02 Cases & Protection
A variety of accessories designed to protect
the Active 10 unit while exploring the great
outdoors:
20.02a Carry Cases (Standard & Deluxe)
The Standard Carry Case has a padded
compartment for the Active 10, closed with a
Velcro top for fast access, and an elasticated
front mesh for additional storage.
The Deluxe Carry Case has a main padded
compartment for the Active 10 itself and a
secondary compartment, ideal for storing
spare batteries, map cards, car keys, small
mobile phone, etc. There are also two mesh
pockets on either side. The zips are covered
to provide weatherproofing, and an additional
elasticated front mesh provides further
storage.
20.02b Lanyard
The Lanyard is 1.3m long, branded with the
Satmap logo, and is adjustable to fit most
requirements. It has two fittings on each end:
a metal clip for attaching to the D-Rings on
the side of the carry case, or a nylon hoop
fitting for attaching directly onto the shoulders
of the Active 10 itself.
20.02c Screen Cover
The removable Screen Cover is made of
tough polycarbonate and is easily replaced,
ensuring the view of the map is always at its
best and never obscured by scratches.
Figure 20.01a
Figure 20.01b
Figure 20.02c
Figure 20.02a
Figure 20.02b