IntelliFlow 2 Liquid Installation Guide
6
875-0387-100 Rev A1
INSTALLING INTELLIFLOW 2
Mount the controller in an available space on the aircraft, for example, in or around the baggage compartment. Ensure
there is enough space for making connections. Access is needed behind the mounting surface to attach the nuts to the bolts
(part P). When you have selected the mounting location, use the controller as a template to mark fastener positions. Drill
1/4” holes for the fasteners and secure the controller (part O) to the aircraft using hardware (part P).
Figure 1: Display of How to Connect Cables and Parts for an IntelliFlow 2 Liquid Install
Cables and Connections for IF2 Liquid Install
New Controller Installation
If you are replacing an installed Legacy IntelliFlow, and have adapter plate (part T), mount the IF2 controller (part O) on
the adapter plate using hardware (part P) and mount the adapter plate to the aircraft using the existing Legacy IntelliFlow
fasteners.
Replacing an Installed Legacy IntelliFlow
•
Store excess cable lengths with a minimum six-inch bend radius.
•
Do not coil cables (introduces noise).
•
Avoid high-temperature exposure (for example - the exhaust, exhaust manifold) when routing.
•
Hand tighten connections only; do not use tools (overtighten).
