Version
3.3
31
8.5
Command table description
1. Create channel list. SATEL Configuration Manager. No DTE
The channel list is generated by the SATEL Configuration Manager. The ready-made list is sent
to the modem using by the SATEL Configuration Manager. The maximum number of channels
on the list is 40. When the modem is powered ON it goes to the default channel.
2. Set channel. SATEL Configuration Manager and DTE
The operating channel can be manually set by the CM, or selected from the list by the DTE.
3. SET Default Channel. SATEL Configuration Manager and DTE
Assigns the default channel.
Note1!
1. If the Default Channel is not set the modem uses the Factory Default Frequency.
2. If the Channel List is established the Default Channel is the 1
st
Channel in the list.
Note2!
When the modem is switched ON
- the modem uses the Default Frequency set by the Factory, if no other settings are done, or
- the User frequency that is set by the SATEL Configuration Manager, if the Channel List has not
been used before switching OFF, or
- the frequency that is set by the Channel List as 1
st
Channel, if the User frequency has not been
used before switching OFF.
4. Go to Default Channel. DTE
Modem goes to the channel which is assigned as default channel.
5. Read Default Channel. SATEL Configuration Manager and DTE
Reads default channel from the modem.
6. Export channel table to file. SATEL Configuration Manager
Saves channel table PC.
7. Import channel table from file. SATEL Configuration Manager
Loads settings from file to SATEL Configuration Manager.
8. Read current settings from modem. SATEL Configuration Manager. DTE one-by-one
All settings can be read by the SATEL Configuration Manager. The DTE can read settings one-
by-one, because there is no such an SL-command that will read all settings using only one
command.
9. Read factory settings. SATEL Configuration Manager. DTE one-by-one
Model, serial number, FW-version, frequency band and module ID can be red from the modem
using the SL-commands.
Read Model = SL No. 52, serial no.= SL?, FW-version = SL 53, frequency band= SL 9, 10,
Module ID= SL 55.
