background image

  

Version 

3.3 

 2 

IMPORTANT NOTICE 

 
 

All rights to this manual are owned solely by SATEL OY (referred to in this user guide as SATEL). 

All rights reserved. The copying of this manual (without written permission from the owner)  by 
printing, copying, recording or by any other means, or the full or partial translation of the 

manual to any other language, including all programming languages, using any electrical, 
mechanical, magnetic, optical, manual or other methods or devices is forbidden.  
 
SATEL reserves the right to change the technical specifications or functions of its products, or to 

discontinue the manufacture of any of its products or to discontinue the support of any of its 
products, without any written announcement and urges its customers to ensure that the 
information at their disposal is valid.  
 

SATEL software and programs are delivered ”as is”. The manufacturer does not grant any kind 

of warranty including guarantees on suitability and applicability to a certain application. Under 
no circumstances is the manufacturer or the developer of a program responsible for any 
possible damages caused by the use of a program.  The names of the programs as well as all 

copyrights relating to the programs are the sole property of SATEL.  Any transfer, licensing to a 
third party, leasing, renting, transportation, copying, editing, translating, modifying into another 

programming language or reverse engineering for any intent is forbidden without the written 
consent of SATEL.

  

 

SATEL PRODUCTS HAVE NOT BEEN DESIGNED, INTENDED NOR INSPECTED TO BE USED 

IN ANY LIFE SUPPORT - RELATED DEVICE OR SYSTEM - RELATED FUNCTION NOR AS A 
PART OF ANY OTHER CRITICAL SYSTEM AND ARE GRANTED NO FUNCTIONAL WARRANTY 
IF THEY ARE USED IN ANY OF THE APPLICATIONS MENTIONED.  

 

Salo, Finland 2009 

 
 

 
 

 
 

 
 

 
 
 
 

 
 
 

Copyright: 2009 SATEL Oy 

No part of this document may be reproduced, transmitted or stored in a retrieval system in any form or by any means without the 
prior written permission of SATEL Oy. This document is provided in confidence and must not be distributed to third parties 
without the express permission of SATEL Oy. 

Summary of Contents for SATELLINE-M3-R1






































Reviews: