Chapter 5 Setting Up the ETC II
Configuring the Network
36
ETC II Network Communicator
To change the port settings, select desired port parameters, and then click
Send. See
Serial Port Connection
in Chapter 3 for information on using
serial ports and available options.
Configuring the Network
Using HyperTerminal or Telnet
To view your present network settings, type stat ip and press Enter:
>stat ip
Ethernet Address Statistics (ENET)
Name: D-Link DE-220 Ethernet
driver
IP address: 192.168.0.213
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
PPP Address Statistics (PNET)
Name: Modem Driver
IP address: 192.168.10.203
Subnet mask: 255.255.255.0
Gateway: 192.168.10.204
To change the network settings, type
ip
and press Enter. If you wish to
change a parameter, type your new setting after the prompt and press Enter.
To leave the setting unchanged, just press Enter.
>ip
Use DHCP (0/1 = no/yes): 0
New:
Network IP address: 192.168.0.203
New:
Network subnet mask: 255.255.255.0
New:
Network default gateway: 192.168.0.1
New:
