Chapter 4 Connecting to the ETC II
Using PAS Software
28
ETC II Network Communicator
Later, you can use the name of your Dial-up connection in Internet
applications to dial to the ETC II. For all Dial-up Internet connections, use
the IP address you have defined in your ETC II for the modem interface via
the Dial-Up Networking Setup (see
Configuring Dial-Up Connections
in
Chapter 5).
Using PAS Software
Supplemental PAS software that came with your ETC II can be used for
configuring the ETC II via the Internet.
See the “PAS Getting Started Guide” supplied on the installation CD for
information on how to install PAS on your PC.
Configuration Database
To communicate with the ETC II from PAS, create a site database for your
device. All communication and configuration data for your device will be
stored in this database. During configuration, store all setups to the site
database so that PAS recognizes device properties regardless of whether
the ETC II is online or offline.
To create a new database for your ETC II:
1.
Select Configuration from the Tools menu, and then click the Sites
button on the right-hand side.
