Chapter 4 Connecting to the ETC II
Using HyperTerminal
20
ETC II Network Communicator
Chapter 4
Connecting to the ETC II
Using HyperTerminal
Windows HyperTerminal allows you to configure the network,
communications and security settings in your ETC II, and to view certain
diagnostic information such as device diagnostics and network statistics.
HyperTerminal is also used for servicing the ETC II and upgrading the device
firmware.
Running HyperTerminal
1.
Connect your PC to the ETC II COM3 RS-232 port using the standard
RS-232 DTE-DTE (null-modem) cable that came with your ETC II.
2.
Run HyperTerminal from the Windows Start -> Programs -> Accessories -
> Communications menu.
Type a name for your new connection and click OK.
In the “Connect Using” box, select the PC COM port to which your ETC II is
connected and click OK.
3.
Select 19200 bps in the “Bits per second” box, select “Xon/Xoff” in the
“Flow control box”, and then click OK.
