SATA Vision 2000, Operating Instructions Manual, Page: 146 / 570

146
EN
Operating Instructions SATA vision 2000
■ Push SATA air warmer [1-14] onto SATA activated charcoal absorber
[1-7] .
■ Connect air hose [1-3] to air connection [1-12] .
■ Connect safety air hose
[1-9]
to the air connection of the belt unit.
■ Set the necessary air volumetric flow rate of the air control valve of the
activated charcoal absorber for breathing air / SATA air warmer.
The breathing protection equipment is operationally ready.
Variant 2
[2]
■ Connect gun compressed air hose [2-5] to the air connection of the
paint spray gun.
■ Connect gun compressed air hose to the air connection of the filter unit.
■ Take the air hose through the belt unit.
■ Connect air hose
[2-3]
to the air connection for breathing air
[2-11]
.
Option
■ Connect top air humidifier [2-4] to air hose [2-3] and air connection
[2-11]
.
■ Connect SATA air warmer
[2-12]
to air connection
[2-11]
.
■ Connect safety air hose [2-6] to the air connection of the belt unit.
■ Set the necessary air volumetric flow rate at the air control valve / SATA
air warmer.
The breathing protection equipment is operationally ready.
Variant 3 [3]
■ Connect gun compressed air hose [3-5] to the air connection of the
paint spray gun.
■ Connect gun compressed air hose to air connection
[3-6]
of the air
control valve T-piece
[3-7]
.
■ Take the air hose through the belt unit.
■ Connect air hose [3-3] to the air connection for breathing air [3-12] of
the T -piece.
Option
■ Connect top air humidifier [3-4] to air hose [3-3] and air connection
[3-12] .
■ Connect safety air hose [3-8] to the air connection of the T-piece of the
belt unit.
■ Connect SATA air warmer [3-14] to air connection [3-12] .
■ Set the necessary air volumetric flow rate at the air control valve / SATA