![background image](http://html.mh-extra.com/html/sata/filter-244/filter-244_operating-instructions-manual_1200261020.webp)
<< Operating instructions SATA filter 244/264/284 >>
III.6
EN
Notice!
Activated charcoal filter cartridge:
• Fibre-bound activated charcoal
• Surface 300 cm²
9.4. Pressure regulation valve [D]:
The requested outlet pressure can be adjusted with the pressure adjust-
ment knob
[1-5]
at the pressure regulation valve
[1-4]
. The pressure is
displayed at the pressure gauge
[1-3]
. The pressure regulation valve se-
cures consistent outlet pressure.
9.5. Air outlet module [E]:
The outlet module is equipped with each two quick couplings and connec-
tion nipples G 1/4 i
[1-6]
.
10. Maintenance
Warning! Attention!
• Filters can only be maintained and serviced when depressurised!
• Sintered filter
[A]/Art. No. 22160
and filter housings
[1-8], [1-12]
have to be cleaned after 6 months at the latest; replace sintered filter,
if necessary!
• The fine filter cartridge
[B]/Art. No. 81810
has to be replaced every
6 months at the latest!
• The activated charcoal cartridge
[C]/Art. No. 85373
has to be re-
placed every 3 months at the latest!
•
When the compressed air is heavily contaminated, the filter
cartridges have to be exchanged in shorter intervals!
• Saturated filter cartridges may cause quality problems during paint
jobs. Furthermore, using a supplied-air respirator could become harm-
ful, causing permanent health damage and even death!
• Depressurise filter (close shut-off tap)
• Unscrew
[3]
the respective filter housing with the pin spanner included
in the delivery.
• Remove condensate cyclone separator
[4-1]
from the filter stage
[A]
, remove and check insert as well as sintered filter
[4-2]
. Clean or
replace if necessary
Instructions-SATA filter 200.indd 6
14.01.2011 15:10:05