![background image](http://html.mh-extra.com/html/sata/filter-244/filter-244_operating-instructions-manual_1200261018.webp)
<< Operating instructions SATA filter 244/264/284 >>
III.4
EN
functionality of the automatic condensate drain valve
• Connect air inlet G ½ i to compressed air line with detachable screw
connection
• Slide condensate drain hose
[1-10]
over the drain valve
[1-9]
; put
hose end into a suitable collection container (not included in delivery).
Notice!
• Mount shut-off tap in front of the filter, e.g.
Art. No. 10934
(not in-
cluded in delivery), allowing easy and safe filter maintenance.
7.2. Retrofit SATA filter 244 to filter 284 [2]
For retrofitting with an activated charcoal filter, a SATA filter 264
[C] (Art.
No. 141226)
is required:
• Depressurise filter (close shut-off tap)
• Remove
[2-1]
pressure regulation valve
[D]
and air outlet module
[E]
from filter combination
[A]/[B]
• Screw on
[2-2]
SATA filter 264
[C]
• Screw on
[2-3]
pressure regulation valve
[D]
and air outlet module
[E]
8. Use
Warning! Attention!
Use solvent-resistant, antistatic, undamaged, technically flawless com-
pressed air hoses with a continuous pressure resistance of minimum 10
bar, e.g.
Art. No. 53090
!
Notice!
• Mount connection nipple G ¼ i (female thread) to hose DN 9 (not
included in delivery).
• To ensure regular filter maintenance, please attach the adhesive stick-
ers 'filter exchange '
[1-7], [1-11], [1-13]
in their respective colours
(yellow = sintered filter
[A]
, blue = fine filter
[B]
, black = activated
charcoal filter
[C]
) to the filter housings
[1-8], [1-12]
.
1. Connect suitable compressed air hose.
2. Turn the pressure adjustment knob
[1-5]
in counterclockwise direction
to the maximum; state = closed
3. Turn pressure adjustment knob
[1-5]
to the right until required pres-
Instructions-SATA filter 200.indd 4
14.01.2011 15:10:04