![background image](http://html.mh-extra.com/html/sata/05155/05155_user-manual_1200049021.webp)
中文
EN
DE RU KO PT
JA
ES
51311/05155
21
c
)
Do not use cutting discs for grinding.
d
)
In order to avoid sparks and abrasive debris hitting the body, depending on the rotation direction of the disc, select the
appropriate way to hold the machine. When grinding metal, sparks will be generated.
Within the range of spark scattering, it is forbidden to store any combustible materials to avoid fire!
Tool maintenance:
Note:
The plug must be removed from the power outlet before maintenance inspection.
1
)
Avoid tools that are subject to shock, impact, or grease.
2
)
Check the mounting screws. Always check that the mounting screws are tight and secure. Loose screws can easily cause serious
accidents.
3
)
Check the cable regularly. If damage is found, it should be repaired immediately. The power cord used in this tool has a special
structure and does not replace the power cord.
4
)
Keep the ventilation slots clean. Dust and oil are often removed to prevent debris from entering.
5
)
Replace the carbon brush. An authorized service center checks and replaces carbon brushes to ensure long-term safe use of the
tool.
6
)
Maintenance must be done by an authorized service center. Use only original accessories and parts.
7
)
Clean. Avoid using plastic solvents that cause plastic cracking to wipe plastic parts. It is recommended to wipe the outer plastic
case with a soft cloth slightly moistened with soapy water.
Do not allow the motor to reach the water. Do not put the entire body into the water, so as to avoid motor failure and electric
shock!
Summary of Contents for 05155
Page 2: ......
Page 107: ...No Date ...