![background image](http://html.mh-extra.com/html/sata/05155/05155_user-manual_1200049019.webp)
中文
EN
DE RU KO PT
JA
ES
51311/05155
19
3
)
installation grinding:
Do not use grinding wheels with safety line speed less than 80m/s. Do not use damaged, unbalanced grinding wheels.
a
)
When the output shaft is completely stationary, press the shaft lock button to fix the output shaft.
b
)
Fix the lower flange to the output shaft, install the grinding wheel against the lower flange, and screw the threaded
upper flange onto the output shaft
(
note that the upper flange The installation direction is as shown in the figure below:
when the grinding plate and the cutting slice are installed, different surface contact pieces are used
)
.
c
)
Check whether the inner hole size of the grinding plate is completely in line with the flange flange, and tighten the upper
flange with a wrench.
4
)
Remove the wrench and release the shaft lock button.
contact surface
flange
Summary of Contents for 05155
Page 2: ......
Page 107: ...No Date ...