SASFORKS EXTREME AUTO PROCESSOR, Manual

Page: 35 / 63

Introduction
• The base machine valve that controls rotator rotation must have a closed
neutral position in order to avoid uncontrolled movement.
• Install a pressure limiter in the base machine's hydraulic system if the pres-
sure cannot be controlled sufficiently.
• The rotator must be grounded when using a rotator with electric swivel.
Maintenance
In the case of leakage, abnormal play, cracks or other operational disruptions,
the rotator must immediately be serviced by authorised personnel. Additional
damage can occur.
Maintenance that requires the rotator to be dismantled may only be per-
formed by trained personnel. The rotator must be dismantled in the right way
to prevent personal injury.
Defective parts shall be replaced only with original spare parts from Indexator
Rotator Systems AB.
Note that the product's bearings are already greased on delivery.
Recommendation when working underwater
There is an increased risk of water and contaminants entering the rotator
when working under water, mainly due to the water pressure. Indexator Rota-
tor Systems AB recommends that the bearing be lubricated daily, before and
after use, to maintain proper lubrication and keep out water. This is particu-
larly important in dirty and salt water or if the rotator is not to be used for
several days. It is essential that all passages are filled with grease or oil to
prevent corrosion.
Instruction concerning bearings with multiple lubrication points
It is essential to lubricate all lubrication points to ensure that the grease is
evenly distributed in the bearing.
Cleaning with a high-pressure washer
We recommend lubricating the bearing after using a high-pressure washer for
cleaning.
2 © Indexator Rotator Systems AB 2300028 2020-02-24