manualshive.com logo in svg

Sartorius Talent Series, Service Manual, Page: 26 / 56

Share
Download
Sartorius Talent Series Service Manual Download Page 26

26

Aut12420.jpg

Activating the BPI Mode

Note:
The BPI mode must be activated in the balance/scale before you can work with
the service software.  You need to use this software, for example, to adjust the
linearity and/or span after adjusting the zero-point offset value, or after
replacing a PCB.

The BPI adapter (part no. 6740-71) must be connected to the balance/scale
before the BPI mode can be activated.  The procedure for connecting the
adapter is as follows:

– Turn off the balance/scale and disconnect it from the power supply
– Remove the weighing pan/load plate
– Remove the protective cap (A) from the bottom of the balance/scale.
– The main PCB is now accessible through an opening in the balance/scale

housing.

– Connect the white plug on the cable of BPI adapter to the corresponding

position on the main PCB.

– Connect the plug on the power cable of the BPI adapter to the power jack

on the balance/scale.

– Plug the balance/scale AC adapter into the power jack on the BPI adapter.

BPI-Button
Anschluss

BPI02.jpg

BPI-Button

Main PCB

Summary of Contents for Talent Series

























































Reviews:

No comments