90
Status Messages
Secura, Quintix User Manual
11. Status Messages
Messages appear on the display when certain events occur:
–
Info messages are displayed for two seconds. The program then returns
automatically to its original state.
–
Error messages are displayed until they are acknowledged with a key.
11.1 Key Fadeout
To prevent operating errors, only relevant functions/keys are displayed depending on
the situation. This prevents most operating errors from occurring. The following
buttons are only available in specific circumstances:
A
Only when there is a weight value within the zero setting range.
D
Only when there is a weight value larger than zero, i.e., positive.
a
Only when a peripheral device is connected and “Print” is not locked.
z
Only when calibration and adjustment functions are available and not
locked.
[
Only when the balance has an electronic level indicator.
v
Only when a weight value larger than zero is the value saved in the
memory, if the value can be saved (e.g., value larger than SQmin).
w
Only when an application can be started (i.e., only when larger than
zero and “Start” is permitted).
11.2 Application Error Messages
“Value is too small!”
When an entered value is too low for the parameter.
“Value is too large!”
When an entered value is too high for the parameter.
“Incorrect license code!”
When password protection is enabled and the code was
entered incorrectly.
“Not able to increase
identifier.”
When the sample ID could not be assigned a number in
ascending order automatically (as described in Chapter
“Individual Identifiers”).
“Not able to decrease
identifier.”
When the sample ID could not be assigned a number in
descending order automatically (as described in Chapter
“Individual Identifiers”).
Visit www.scaleman.com your Authorized Sartorius Distributor
Visit www.balances.com for the full line of Sartorius Laboratory Balances
