background image

12

Care and Maintenance

Cleaning

!

Unplug the AC adapter from the wall 
outlet (mains supply). If you have a data
cable connected to the interface, unplug
it from the scale.

!

Do not use caustic agents, concentrated
acids or pure alcohol.

$

Make sure that no liquid enters the scale
housing.

$

Clean the scale using either a brush or a
soft, dry, lint-free cloth.

Storage and Shipping Conditions

$

To ensure safe shipment, your scale has
been packaged using environmentally-
friendly materials. You should retain
these materials in case you need to pack-
age your scale for storage or return 
shipment.

$

Storage temperature: –20°C to +75°C

$

Permissible moisture level for storage of
the packaged scale: 90% max.

$

Read and follow the instructions given in
the section entitled “Safety Inspection.”

Safety Inspection

Safe operation of the PMA is no longer
ensured when:

– There is visible damage to the AC adapter
– The AC adapter no longer functions

properly

– The AC adapter has been stored for a 

relatively long period under unfavorable
conditions

– The equipment has been exposed to

rough handling during shipment

§

Observe the warnings and safety 
precautions in this manual
Notify your nearest Sartorius Service 
Center or the International Technical
Support Unit based in Goettingen, 
Germany. Maintenance and repair work
may only be performed by service techni-
cians who are authorized by Sartorius and
who have access to the required service
and maintenance manuals, and have
attended the relevant service training
courses.

!

The seals affixed to this equipment indi-
cate that only authorized service techni-
cians are allowed to open the equipment
and perform maintenance work so that
safe and trouble-free operation of the
equipment is ensured and the warranty
remains in effect.

Replacing the In-Use Dust Cover

§

Remove the weighing pan

PMA.Touc

h up

Summary of Contents for PMA600H
























Reviews: