Sartorius PMA600H, Installation Instructions Manual

Page: 6 / 23

6
Connection to AC Power
The equipment is powered through the AC adapter
supplied.
!
Observe the safety precautions and warnings in this
manual.
Make sure the voltage rating of the AC adapter matches
that of your local line voltage (mains supply). If it does
not match your local voltage rating or if the plug design
differs from your local standard, contact your Sartorius
office or dealer. Use only original Sartorius AC adapters.
The use of AC adapters from other manufacturers, even
if these units have a registered approval rating from a
national testing laboratory, requires the approval of a
certified technician.
§
Insert the right-angle plug into the DC jack (8) on the
scale.
§
Plug the AC adapter into an electrical AC power outlet.
Inserting Batteries
Note:
Batteries are not included with the equipment supplied.
!
Use only commercially available batteries.
(8 size AA). Recharge batteries using only an external
battery charger.
§
Turn the scale on its side and open the battery compart-
ment (remove the battery compartment cover).
§
Insert the batteries. Make sure the polarity is correct.
§
Close the battery compartment (replace the lid, making
sure it locks into place).
!
Used batteries constitute hazardous waste (i.e., are not
household waste) and must be disposed of in accor-
dance with the waste management laws applicable in
your country.
+
+
+
+
+
+
+
+
-
-
-
-
- -
-
-