Sartorius MSA3.6P, User Manual

Page: 59 / 201

Cubis MSA User Manual 59
Task Management
Example: Creating a task
D
t
Open Task Management and touch
'FKV
.
y
The list of options is displayed.
t
To define a new task, touch
%TGCVG
.
y
An application list is displayed.
t
To view all applications, use the scroll bar on the right.
t
Select the application you want to assign to the new task.
t
Configure this application as required. The program guides you through the
configuration menu.
t
If you want to assign additional applications to the task, these applications
should also be configured (see Combining Applications into One Task).
y
After all applications for the new task have been configured, the following
parameters have to be set: Configure the settings for weighing and printouts.
All settings make here will only affect
the new task .
On balances verified for use as legal measuring instruments, modification of some
settings may limited or prohibited altogether.
Settings for Weighing
t
Check all settings and change as required.
Explanations for the individual options can be found in the chapter System Settings
in the section Device Parameters.
t
Touch
0GZV
.
Settings for Printouts
t
Check all settings and change as required.
Explanations for individual options can be found in the System Settings chapter
in the Device Parameters section.
t
Touch
0GZV
.
t
Enter a short name and a description for the new task.
t
Touch
5CXG
.
y
The task selection list with the new task is displayed.