User Manual
.
Version 1.2
10
d)
S-Video
video cable - This video
cable is a single cable with a video
connector (usually black.) You will
also need to attach two audio
connectors (L-R speakers, audio
connectors are usually red and white).
Attach the other ends to your Video
Player. The S-Video and CVBS video
cannot be used simultaneously.
Note:
If your Video Player gives you a choice of using HDMI, YPbPr and CVBS/S-
Video, it is better to choose HDMI for ease of installation. Also, HDMI and
YPbPr picture quality are both noticeably better than CVBS/S-Video.
Step 2: Connect the HDTV set to the Receiver
Connect your PowerHDLink receiver to the HDTV. The receiver is capable of
using HDMI, YPbPr and CVBS cables. You must choose from one those options
as shown below.
a)
HDMI
cable - The figure to the right shows an HDMI connection to the RX.
Attach the other end to your HDTV.
b)
YPbPr
cables - Connect the YPbPr cables in the same way as the Player-TX
connections, matching the colors between the connectors and adapters. There
are two audio connectors for the L-R audio connectors below the YPbPr
adapters (on the RX). Attach the other ends of all the connectors to your HDTV.
c)
CVBS
cable - Connect the
CVBS
and Audio connectors to the 3 connectors
below the YPbPr connectors (as shown right). Attach the other ends to your
HDTV.
