5
UK
LED
MODE
ACTION
ON
- Compressor enabled
Flashing
- Programming Phase (flashing with LED
)
- Anti-short cycle delay enabled
ON
- Fans enabled
Flashing
- Programming Phase (flashing with LED
)
- Activation delay active
ON
- Defrost active
Flashing
- Drip time active
①②③④
H
ON
- Freezing cycle 1, 2, 3, 4 or hold mode active
①②③④
H
Flashing
- Instrument temporarily stop
ON
- Alarm signal
AUX –AUX2
ON
- Aux or Aux2 enabled
Setting the Time / Date
1.
Hold the DOWN key (1) until the Min label is displayed.
2.
Use the UP and DOWN KEY to browse the parameters.
MIN = Minutes
HOU = Hours
DAY = Day
MON = Month
YEA = Year
TIM = 12/24 Hr Clock
3.
To Modify push the SET button and then the UP and DOWN keys.
4.
To Confirm: push the SET button.
5.
To exit the menu: Push together SET + UP keys or wait 5 sec.
Selecting a Cycle
Push the
to move among the cycles C1, C2, C3, C4 and the holding cycle. The related symbol on the
display will be lighted and the cycle will be selected.
Note:
to pass from a cycle to another one simply push the
key when the controller is in stand–by mode.
Cycles are pre-set with the following values:
Cy1:
for fast chilling and conservation of foods (hard +soft chill).
Cy2:
for chilling and fast freezing of foods (hard +soft + freezing cycle).
Cy3:
for direct fast freezing (only fast freezing cycle)
Cy4:
for direct fast freezing without holding (hard chill + freezing cycle)
HLd:
hold mode function
dEF:
for starting a manual defrost
