_
English
_
IMPORTANT SAFEGUARDS
•
The appliance is intended for household use only. Do not use for industrial purpose.
•
Unplug before assembling and disassembling the unit.
•
Close supervision is necessary when any appliance is used near children.
•
When carrying the unit be sure to hold the body with both hands. Do not carry the unit by
the hopper plate or head.
•
Do not fix the cutting blade and cutting plate when using the Kibbe attachment.
•
Never push products by hand. Use the provided food pusher.
•
Do not grind hard food such as bones, nuts, etc.
•
Do not grind ginger and other materials with hard fiber.
•
Continuous running of meat grinder should not exceed 10 minutes with the following 10
minutes interval for motor cooling.
•
To avoid jamming, do not force to operate the unit with excessive pressure.
•
When the circuit breaker activates, do not switch on.
•
Never try to replace the parts and repair the unit by yourself.
•
This appliance is not intended for use by persons (including children) with reduce physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
•
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a hazard.
BEFORE USING FOR THE FIRST TIME
•
Check that voltage indicated on the rating label corresponds to the mains voltage in your
home.
•
Wash all parts (except body) in warm soapy water.
•
Before plug in, ensure the ON/0/R switch is in “
0
” position.
INSTRUCTIONS FOR USE
ASSEMBLING
•
Press the unlock button, hold the head and insert it into the inlet (when inserting, please pay
attention, the head must be slanted as per arrow indicated on the top, see Fig.1), then move
the head anticlockwise so that the head being fastened tightly (Fig.2).
•
Place the feed screw into the head, long end first, and turn to feed the screw slightly until it
is set into the motor housing (Fig.3).