SAPIRHOME SP-1310-A Series, User Manual

Page: 7 / 70

Different positions of the pressure-limiting valve:
Position of taking out pressure-limiting valve
Steam and pressure releasing
I
Position of the low pressure step (60kPa)
II
Position of the high pressure step (100kPa)
Don’t make pressure-limiting valve point to when there is pressure
inside!
V. How to use
Please clean the pressure cooker, add to water and heat half an hour before first time
using, by means of cleaning bad smelling.
1. Before use, make sure that the steam-releasing hole is unobstructed. Make sure that the
safely open-preventing valve hole and the pressure-limiting valve hole are unobstructed. If
any of them is obstructed, clear them with a dredging needle.
2. Closing the lid.
Align the mark “O” on the lid to the mark “O” on the lower handle and turn the lid
clockwise to close the cooker properly. Align the upper and lower handle, push the button
forth and lock the upper and lower handle tightly. (Fig.7)
1 – Position for open 2 – Position for close
3. Adjusting working pressure.
Close the lid, according to the requirement. Adjust the pressure-limiting valve by
switching it to the desired position.
Fig.7