Sapido MB-1112 User Manual Download

Page: 65 / 85

http://www.sapido.com.tw/ User Manual 1.0

Apply Changes & Reset &

Refresh

Please click on Apply Changes to save the setting data. Or you
may click on Reset to clear all the input data. Or you may click on
Refresh to update the system time on the screen.

6.4.5

UPnP Setting

Universal Plug and Play (UPnP) is a standard of networking protocols promulgated by

the UPnP Forum. The goals of UPnP are to allow devices to connect seamlessly and to

simplify the implementation of networks in the home (data sharing, communications, and

entertainment) and in corporate environments for simplified installation of computer

components. N+ Mobile 3G Modem Router supports UPnP function, and can cooperate with

other UPnP devices. When you activate UPnP, please click My Network Places. Users will

see an Internet Gateway Device icon. By click the icon, users can enter the GUI of the router.

If you do not wish to use UPnP, you can disable it.

Enable/Disable UPnP: Select to enable or disable this function.

Summary of Contents for MB-1112






















































































Search results

Summary of Contents for MB-1112

Reviews:

Related manuals for MB-1112

Brands by name

Popular brands

Sapido MB-1112, User Manual

Search results

Summary of Contents for MB-1112

Reviews:

Related manuals for MB-1112

Brands by name

Popular brands