Sapido MB-1112 User Manual Download Page 36

Page: 36 / 85

http://www.sapido.com.tw/ User Manual 1.0

Channel Number

Please select the channel; it has Auto, 1, 2~12 or 13.

Broadband SSID

User may choose to enable Broadcast SSID or not.

Data Rate

Please select the data transmission rate.

Associate Clients

Check the AP connectors and the Wireless connecting status.

Enable MAC Clone
(Single Ethernet Client)

Clone the MAC address for ISP to identify.

Enable Universal Repeater
Mode (Acting as AP and
Client simultaneously)

Allow to equip with the wireless way conjunction upper level,
provide the bottom layer user link in wireless and wired way in the
meantime.

(The IP that bottom layer obtains is from upper level.) Please also
check Section 4.1.2.2 for more details.

SSID of Extended Interface

While linking the upper level device in wireless way, you can set
SSID to give the bottom layer user search.

Apply Change & Reset

Click on “Apply Change” to save the setting date, or you may click
on “Reset” to clear all the input data.

4.1.2.1 Multiple APs

The N+ Mobile 3G Modem Router can register up to 4 SSIDs (wireless LAN group). It can

be used as if there are multiple wireless LAN access points with one product. Each SSID

could be set with different data rate, WMM and access type.

Item

Description

Enable

Enable or disable the service.

Band

Select the frequency.

SSID

Enter the SSID

Data Rate

Select the data transmission rate.

Summary of Contents for MB-1112






















































































Search results

Summary of Contents for MB-1112

Reviews:

Related manuals for MB-1112

Brands by name

Popular brands

Sapido MB-1112, User Manual

Search results

Summary of Contents for MB-1112

Reviews:

Related manuals for MB-1112

Brands by name

Popular brands