http://www.sapido.com.tw/ User Manual 1.0
56
(2) You will receive an IP address from Router A.
If you failed the WDS setting, please check you setting with refer to the list below.
Note: LAN IP address should be under the same segment but cannot be the same number.
6.3.2
WPS
This page allows user to change the setting for WPS (Wi-Fi Protected Setup). Using this
feature could let your wireless client atomically synchronize it’s setting and connect to the
Access Point in a minute without any hassle. 3.5G Mimi Router could support both Self-PIN
or PBC modes, or use the WPS button (at real panel) to easy enable the WPS function.
Router A
Router B
Mode
Router
AP
LAN IP Address
Set the same segment as the
router B(Note)
Example :192.168.1.1
Set the same segment as the
router A(Note)
Example :192.168.1.2
Security
Set the same security as
Router B
Set the same security as
Router A
DHCP
Enable
Disable
MAC Address
Same as Router B
Same as Router A
