http://www.sapido.com.tw/ User Manual 1.0
50
Device Name
Configures the device name of the router.
802.1d Spanning Tree
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network
protocol that ensures a loop-free topology for any bridged LAN.
Select enable or disable the IEEE 802.1d Spanning Tree function
from drop-down list.
Clone MAC Address
If your ISP asks you to enter a specific MAC Address, please input
the correct info at the column.
Apply Change & Reset
Click on “Apply Changes” to save the setting data. Or you may click
on “Reset” to clear all the input data.
6.2
Dynamic DNS Setting
You can assign a fixed host and domain name to a dynamic Internet IP address. Each time
the router boots up, it will re-register its domain-name-to-IP-address mapping with the DDNS
service provider. This is the way Internet users can access the router through a domain name
instead of its IP address.
Note: make sure that you have registered with a DDNS service provider before enabling this feature.
Please enter Domain Name, User Name/Email, and Password/Key. After entering, click on
“Apply Changes” to save the setting, or you may click on Reset to clear all the input data.
Item
Description
Enable/Disable DDNS
Select enable to use DDNS function. Each time your IP address to
WAN is changed, and the information will be updated to DDNS
service provider automatically.
Service Provider
Choose correct Service Provider from drop-down list, here including
DynDNS, TZO, ChangeIP, Eurodns, OVH, NO-IP, ODS, Regfish
