Sapido GR-1733 User Manual Download

Page: 89 / 90

http://www.sapido.com.tw/

User Manual v1.0.0

5. Q: Is the Router cross-platform compatible?

A: Any platform that supports Ethernet and TCP/IP is compatible with the Router.

9.8

Others

Q: Why does the router dial out for PPPoE mode very often?

A: Normally some of game, music or anti-virus program will send out packets that

trigger the router to dial out, you can close these programs. Or you can set the idle

time to 0, then control to dial out manually.

Q: What can I do if there is already a DHCP server in LAN?

A: If there are two DHCP servers existing on the same network, it may cause conflict

and generate trouble. In this situation, we suggest to disable DHCP server in router

and configure your PC manually.

9.9

USB Device

Q: How many USB devices can be connected to the Product?

A: SAPIDO GR-1733 has 1 USB ports.

Summary of Contents for GR-1733



























































































Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands

Sapido GR-1733, User Manual

Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands