Sapido GR-1733 User Manual Download | Manualshive

Page: 2 / 90

background image

http://www.sapido.com.tw/

User Manual v1.0.0

2

FCC Statement

Federal Communication Commission Interference Statement This equipment has
been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

1. The device complies with Part 15 of the FCC rules. Operation is subject to the

following conditions:

2. This device may not cause harmful interference, and this device must accept any

interference received, including interference that may cause undesired
operation.

3. FCC RF Radiation Exposure Statement: The equipment complies with FCC RF

radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.

4. This Transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

5. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user authority to operate the
equipment.

IMPORTANT NOTE
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance20cm between the radiator & your body.

«
1
2
3
4
...
»

Summary of Contents for GR-1733



























































































Reviews:

No comments

Related manuals for GR-1733

i-bus KNX IPR/S 3.5.1

Brand: ABB Pages: 44

Brand: Panasonic Pages: 44

MatrixPRO-II DVI 16x16

Brand: Barco Pages: 43

Brand: Barco Pages: 5

Brand: Datasheen Pages: 25

Brand: Profile Pages: 6

Brand: Oracle Pages: 112

Magic WiFi mini Ek

Brand: Devolo Pages: 22

AirStation WHR-G300N

Brand: Hornington Pages: 6

Brand: Galaxy Pages: 30

ExpressBox2 EB2

Brand: Magma Pages: 74

Brand: ZyXEL Communications Pages: 3

Brand: ADTRAN Pages: 20

Brand: AIC Pages: 101

ADSL Ethernet & USB Combo Router Lynx L-510

Brand: Starbridge Networks Pages: 59

Brand: Amphenol Pages: 43

Brand: C&H Technologies Pages: 50

OmniTik UPA-5HnD

Brand: RouterBOARD Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands