Sapido GR-1733 User Manual Download

Page: 31 / 90

http://www.sapido.com.tw/

User Manual v1.0.0

internet.

Enable IGMP Proxy

Enable IGMP Proxy to provide the service for IP hosts and
adjacent multicast routers to establish multicast group
memberships.

Enable Ping Access on
WAN

Enable Ping Access on WAN will make WAN IP address
response to any ping request from Internet users. However, it is
also a comma way for hacker to ping public WAN IP address, to
see is there any WAN IP address available.

Enable Web Server Access
on WAN

This option is to enable Web Server Access function on WAN.

Apply Change

Click “Finish” to complete the setting

Rebooting this product is started. Please wait for a while.

3.2.3

WAN Interface- Wireless

Select WAN under the IP Config menu, and choose wireless for the WAN Interface. Its

associated setting will show as below.

Summary of Contents for GR-1733



























































































Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands

Sapido GR-1733, User Manual

Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands