Sapido GR-1733 User Manual Download

Page: 37 / 90

http://www.sapido.com.tw/

User Manual v1.0.0

Chapter 4

Wireless Setup

4.1

Wireless Setup

There are two ways to setup wireless LAN with SAPIDO GR-1733. You can use either way

to setup Wireless LAN.

4.1.1

Setup Wireless LAN by WPS button

You can setup wireless LAN easily by using the WPS button if both WLAN router and the

WLAN adapter (client) are WPS supported. Before starting the setup, please check the

things below:

λλλλ

Get ready for Internet connection with SAPIDO GR-1733

λλλλ

The WLAN adapter is finished installation and plug in your computer/ laptop.

There are two ways to setup a wireless LAN between SAPIDO GR-1733 and your wireless

adapter:

Setup with WPS button, if your wireless adapter has a physical WPS button.

(1) Press the WPS button (A) from SAPIDO GR-1733 and wait for Wireless/WPS LED

light (B) changed into orange.

(2) Press the WPS button (C) from the adapter until the setup window shows up.

(3) Open a web browser to check the internet connection.

Summary of Contents for GR-1733



























































































Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands

Sapido GR-1733, User Manual

Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands