Sapido GR-1733 User Manual Download

Page: 34 / 90

http://www.sapido.com.tw/

User Manual v1.0.0

Item

Description

Device Name

Input a name for this router.

IP Address

The default IP address is 192.168.1.254

Subnet Mask

Enter the Subnet Mask address

Default Gateway

Enter the Default Gateway address for LAN interfaces

DHCP

Select DHCP type: Client, Disable, or Server under different
environment.

DHCP Client Range

When enable DHCP server, you can fill in the start and end IP
address; client will be assigned an IP address from the range.

802.1d Spanning Tree

Disable or Enable the 802.1d Spanning Tree Protocol (STP)

Clone Mac Address

Some ISPs require MAC address registration. In this case, enter
the MAC address registered to the provider to "Clone MAC
Address"

Apply Change & Reset

Click on Apply Change to save the setting date, or you may click
on Reset to clear all the input data.

3.4

WiFi AP Mode- Using as a Network Converter

Make sure to shift the mode into WiFi AP Mode.

Summary of Contents for GR-1733



























































































Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands

Sapido GR-1733, User Manual

Search results

Summary of Contents for GR-1733

Reviews:

Related manuals for GR-1733

Brands by name

Popular brands