44
Hiding Image Partially <OPTION> – <PRIVACY MASK>
■
To preview the entire specified masks
Select <PREVIEW> and press the SET button.
To return to the previous screen, press the SET button again.
■
To cancel the masking setting
Change “ON” of the MASK number to “OFF” in the MASK selection
screen.
■
To change the previously specified masking setting
Repeat steps from
1
to
4
.
6
Set <MENU> to “END” and press the SET button.
R
Closes the settings screen and returns to the normal monitoring
screen.
The specified masks appear on the screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
(Example: 4 maskings)
MEMO:
When multiple masking positions
overlap, the masking setting with the
smaller MASK number will be preceded.
Note:
If masking is set, the camera name will not be displayed on the monitor
even if <TITLE> is “ON”.
3
MASK 1
2
4
4
4
3333
3333
22
22
111
111
MEMO:
If <ALARM SIGN> is “ON” (see page 41), the alarm notification “A”
will be shown on all the masks during the time set in <DURATION>
(see page 40) when an alarm signal comes in.
If both of <ALARM SIGN> and <MOTION> (see page 38) are
“ON”, the alarm notification “A” will be shown when the motion
sensor detects movement.
• If an alarm or movement is detected while an unmasked image
is being displayed, an alarm notification “A” appears in the top
left corner.
A
A
AAAA
AAAA
AA
AA
AAA
AAA
A
L5BL2_BM2_US_XE(GB).book 44 ページ ２００６年６月１４日 水曜日 午後１２時５６分
